News

Welding method of enamel rotary vacuum dryer

Source: Our Website | Date of issue: 2020-07-23 08:30:51 | Views: 14092

Abstract:

The enamel rotary vacuum dryer needs to be welded during processing, and there are certain requirements when welding. Different mechanical equipment uses different welding methods and processes during processing. For the arc welding method, the usage is still relatively large.
Because the equipment needs to be able to withstand enough acid and alkali materials when in use, the process selected when welding should also ensure good practicability.
When using this welding method, you need to manually control the electrode for welding. Because the manual welding is more flexible, and the operation is relatively simple without too much difficulty, because the manual welding method is used, the welding effect is often better. However, the weld seam after welding with acid electrode will contain more impurities. When the vacuum dryer for enamel is used after processing, there will be some defects; but when welding with alkaline electrode The effect is relatively good, and the effect of using manual welding is very good.

Previous: Causes of damage to glass-lined vacuum dryers and repair methods

Next: Porcelain surface protection during installation of glass-lined equipment

Relevant Articles

What is the difference in quality between…

2020-11-05 02:05:06

1. At present, the enamel spray powder in my countrys glass-lined equipment industry is mainly divided into two categories: cold spray (powde…
Causes of damage to glass-lined vacuum dr…

2020-02-06 14:09:49

Glass-lined vacuum dryer is a very important equipment in the chemical production industry. When it is in use, some damage will inevitably oc…
Quanpin Machinery teaches you the prepara…

2019-08-28 10:51:37

1. Use and damageGlass-lined equipment is widely used in the chemical industry. The glass-lined glaze layer attached to the surface of the ir…
Porcelain surface protection during insta…

2019-08-07 09:37:36

1. When carrying out construction and welding near the glass-lined equipment, care should be taken to cover the nozzle to prevent external ha…
Factors affecting drying rate of drying e…

2020-12-23 14:02:22

1. Drying rate of drying equipment1. The weight lost by the material in unit time and unit area is called drying rate.2. Drying process(1) In…
Four Process Design Methods of Rotary Fla…

2020-09-18 16:00:37

The new type of rotary flash dryer uses a variety of devices, such as a variety of feeding devices, so that the feeding is continuous and sta…