Feedback form of drying equipment selection |
Please fill in the form in detail, so that our company can provide careful selection recommendation |
|
|
| 1. Material name:
Molecular formula:
PH value:
|
|
|
|
| 3. Other characteristics of materials:
Flammability
Explosive
Reunion
Peculiar Smell Other:
|
|
| 4. Name of evaporated medium:
Molecular formula:
PH value:
|
| Boiling point of evaporated medium:
℃ ;Need to recycle: Yes
,No
|
|
| 5. Initial moisture content of material:
% ; It contains crystal water
|
| Moisture content after drying:
% ;Residual crystal water required:
|
|
| 6. Initial temperature of material:
℃ ;Required temperature after drying:
℃。Whether to adopt cooling material receiving: Yes
,No
|
|
| 7. The maximum temperature the material can bear when drying:
℃;The optimum temperature range for drying materials is as follows:
℃ |
|
| 8. softening temperature of materials:
℃;Melting point of material:
℃ |
|
| 9. Specific heat of material:
KJ/kg. ℃;Thermal conductivity of material:
KJ/m2.h. ℃ |
|
| 10. True density of material:
kg/m3,Bulk density of material:
kg/m3 |
|
| 11. Particle size distribution range:
mm(item)to
mm(item);Proportion content≥
%
|
| Among them: maximum particle size
mm(item);Proportion content≥
% |
| Minimum particle size:
mm(item);Proportion content≥
% |
|
| 12. Requirements for particle size of finished product after drying:
mm(item) |
|
| 13. Viscosity of material in original state:
Centipoise(cp);Does heating reduce viscosity: Yes
,No
|
|
| 14. Whether the material form can be destroyed during drying: Yes
No
|
|
| 15. Product output after drying:
kg/h (or wet material handling capacity:
kg/h) |
|
| 16. drying method requirements:
Continuous drying ,
Gap drying ,
Dynamic drying ,
Static drying , |
|
Hot air drying ,
Vacuum drying ,
Microwave drying ,Other:
|
|
| 17. Drying methods of materials or similar products in the past:
|
| Desired dryer model:
|
|
| 18. Air intake requirements:
Natural ventilation ,
300000 grade filtration,
100000 grade filtration,
10000 grade filtration, Other:
|
|
| 19. User's material requirements for drying equipment:
Material contact is stainless steel ,
All stainless steel ,
Titanium material , |
|
Aluminium alloy ,
Carbon steel ,
Glass lined ,
Tetrafluoro , Other:
|
|
| 20. Stainless steel model to be used:
SUS304 ,
SUS321 ,
SUS316 ,
SUS316L,
SUS2235 , |
| Other:
|
|
| 21. Requirements for material recovery rate: ≥
%;Dust emission requirements for environmental protection: ≤
mg/nm3 ; |
| Requirements for environmental emission of waste gas: ≤
mg/nm3;Maximum allowable discharge requirements of waste water and liquid waste≤
mg/L |
|
| 22. Hot medium and heat source used in drying process: hot water
℃ ; Steam
Mpa; Heat transfer oil
℃; |
| Electric Heating
,Coal fired hot blast stove
,Oil fired hot blast stove
,Gas hot blast stove
,Other:
|
|
| 23. Thermal medium and heat source: Self provided
,Buy separately
,Supporting Procurement
,Other:
|
|
24. Cleaning and sanitation requirements for equipment:
|
|
| 25. Place of use:
,Altitude:
,Humidity:
,Maximum Temperature:
, |
| Minimum Temperature:
,Average annual temperature:
,Other:
|
|
| 26. Estimated investment in purchased equipment (RMB):
Ten thousand yuan |
|
27. Other requirements：
|
Verification Code：
 看不清楚？ |
| |
|
|
